Ethylene-vinyl acetate EVA Film Interlayer

Technical Induction of Polyvinyl Butyral PVB Interlayer Film
All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
eva@evafilms.com
【Product 2】CNC-SmartSMART FILM FOR PRIVACY SWITCHABLE GLASS
smartfilm@smartestglass.com
【Product 3】CNC-Shield PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
pvb@pvbfilm.net
Web: www.CNCglass.com www.CNCnext.com www.HelloGlass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com
By Peter Shin www.HelloGlass.com
Polyvinyl Butyral PVB Interlayer Film

Polyvinyl butyral PVB interlayer film is the resin that compounded
from polyvinyl alcohol reacted with butyraldehyde.  Polyvinyl butyral
PVB interlayer film is usually implied in the situation that needs
strong binding, toughness and flexibility. Polyvinyl butyral PVB
interlayer film as a protective interlayer film, is often used to make
automotive laminated glass and architectural laminated glass.
Polyvinyl butyral PVB interlayer film has many properties: Impact
resistance, great adhesion, sound control, UV-radiation filtered, and
good aging resistance.
Technical Parameters of Polyvinyl Butyral PVB Interlayer Film
Note: Following data is general number of PVB Film, and the data may
be different of different Polyvinyl Butyral manufacturers, because the
formula of manufacturing Polyvinyl Butyral may be different.
Property Items PVB
Density 1.069g/cm³
Tensile Strength ≥ 20MPa
Elongation  ≥ 200%
Visible Light Transmission Rate 88.5%
Haze ≤ 0.4%
Ultraviolet Radiation Blocking Rate 99%
Weather Resistance
(85℃,85% Humidity,UV,1000 hrs） Moisture Absorption  0.4-0.6%
Shrinkage  High Temperature Resistance Qualified
Moisture Resistance Qualified
Impact Resistance Against Shot-Bag Qualified
Radiation Resistance Qualified
Ball Impact Peeling Resistance Qualified
Polyvinyl Butyral PVB Interlayer Film for Laminated Glass
Polyvinyl Butyral PVB interlayer film have the impact resistance. The
single  flat glass would lead to serious injuries to human being or
other properties when it’s broken, but Laminated glass with Polyvinyl
Butyral PVB interlayer film can stick the glass together when it’s
impacted, which can remain it’s safety. The safety of the laminated
glass with Polyvinyl Butyral PVB interlayer film is popularly
recognized as safety glass in architectural design.
And Polyvinyl Butyral PVB is good at penetration resistance, so is
better than tempered glass in Automotive windshield implication.
CNC-INTERLAYER TECH:
【1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【2】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Mail: cnc@cncnext.com Web: www.CNCnext.com
benext77@gmail.com/benext77@hotmail.com

Storage and Transportation Notes of Polyvinyl Butyral PVB Interlayer Film
By, Peter Shin www.helloglass.com
All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force EVA INERLAYER FOR

ARCHITECTURAL LAMINATED GLASS eva@evafilms.com
【Product 2】CNC-SmartSMART FILM FOR PRIVACY

SWITCHABLE GLASS smartfilm@smartestglass.com
【Product 3】CNC-Shield PVB INTERLAYER FOR

AUTOMOTIVE WINDSHIELD GLASS pvb@pvbfilm.net
Web: www.CNCglass.com www.CNCnext.com

www.HelloGlass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com

Packaging:
Polyvinyl Butyral PVB interlayer film manufacturer would separate
Polyvinyl Butyral PVB interlayer film by PE membrane. Aluminum
vacuumed packaging in to poly-wooden box or paper carton. The PE
membrane can avoid the Polyvinyl Butyral PVB interlayer film stick
itself and  more convenient for pre-laminating processing.

Storage and Transportation
Polyvinyl Butyral PVB interlayer film should be stored in clean dry
warehouse, avoiding sunlight or high temperature, humidity, heat,
radiation. If the packaging is opened, The temperature should be lower
than 20degree, humidity should be less than 30%.
In transportation, Polyvinyl Butyral PVB interlayer film should avoid
strong sunlight, rain and shake-out too much. The maximum layers
should be less than 3 in a container, which to avoid changing shape of
the Polyvinyl Butyral PVB interlayer film because of great press.

All rights reserved by CNC-INTERLAYER TECH:
【1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【2】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Web: www.CNCnext.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com

Procedure Instruction of Pre-Laminating Polyvinyl Butyral PVB Interlayer Film
All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force EVA INERLAYER FOR

ARCHITECTURAL LAMINATED GLASS eva@evafilms.com
【Product 2】CNC-SmartSMART FILM FOR PRIVACY

SWITCHABLE GLASS smartfilm@smartestglass.com
【Product 3】CNC-Shield PVB INTERLAYER FOR

AUTOMOTIVE WINDSHIELD GLASS pvb@pvbfilm.net
Web: www.CNCglass.com www.CNCnext.com

www.HelloGlass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com
www.helloglass.com
www.cncnext.com
1.
Clean the glass, better use the softened water to clean the oil, dust,
flaw on the glass surface. Then dry the glass and put away in the
laminating room.

2.
When cutting the Polyvinyl Butyral PVB interlayer film according to
the glass, make sure the Polyvinyl Butyral PVB interlayer film only
2mm extra larger than the glass, or the too much extra Polyvinyl
Butyral PVB interlayer film will seal the laminated glass before all
the Polyvinyl Butyral PVB interlayer film is totally melted. 3.
Requirement of Pre-Laminating Room for Polyvinyl Butyral PVB interlayer film
Pre-laminating room’s environment is very important for manufacturing
successfully laminated glass with Polyvinyl Butyral PVB interlayer
film. There are some requirements：

+Install double doors, and the double doors not open at the same time
and better install wind-shower equipment in the middle of double
doors.

+The temperature inside the pre-laminating room should keep at 18-20
degrees and humidity at 20%-30%.

+Workers should wear antistatic suit, glove, hat.

+Regularly clean the equipments and pre-laminating room.
All rights reserved by CNC-INTERLAYER TECH:
【1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【2】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Mail: cnc@cncnext.com
Web: www.CNCnext.com
benext77@gmail.com/
benext77@hotmail.com

Bubbles at Edges of Laminated Glass with Polyvinyl Butyral PVB interlayer film
www.helloglass.com

All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force EVA INERLAYER FOR

ARCHITECTURAL LAMINATED GLASS eva@evafilms.com
【Product 2】CNC-SmartSMART FILM FOR PRIVACY

SWITCHABLE GLASS smartfilm@smartestglass.com
【Product 3】CNC-Shield PVB INTERLAYER FOR

AUTOMOTIVE WINDSHIELD GLASS pvb@pvbfilm.net
Web: www.CNCglass.com www.CNCnext.com

www.HelloGlass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com

Condition:
Small bubbles at the edges of safety laminated glass with Polyvinyl
Butyral PVB interlayer film.

Reason: 1)
When the autoclave decreasing the pressure, although the temperature
detector shows the temperature is under 50 degree Celsius, due to the
glass thickness and square, sometimes, the glass temperature is still
higher than 50 degree Celsius, so if the pressure is lowering, some
air will absorbed into the glass edges.

Solution:
Even when the temperature detector shows the temperature is lower than
 50 degree, don’t decrease the pressure too hurry, wait for some
minutes, make sure the real temperature of the glass is lower than 50
degree. If the laminated glass is thick, or many layers, or large
square, then the waiting time should be a little longer.

Reason:2)
The tempered glass is not high quality enough, and the plainness of
the tempered glass is not good enough.

Solution:
Choose better quality tempered glass, or use the thicker Polyvinyl
Butyral PVB interlayer film.

Reason:3)
Maybe the detector of the temperature and pressure is not correct.

Solution:
Make sure the temperature and pressure parameters is correct .

ALL RIGHT RESERVED BY CNC-INTERLAYER TECH:
【1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【2】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Mail: cnc@cncnext.com
Web: www.CNCnext.com
benext77@gmail.com/
benext77@hotmail.com

All rights reserved by:
China (Ethylene-vinyl acetate)EVA Interlayer Film Manufacturer for
Safety Laminated Glass, Smart Glass, Privacy Glass, LED
Glass, PV Solar Encapsulationetc.
cnc@cncnext.com / www.cncnext.com
eva@evafilms.com / www.evafilms.com
benext77@gmail.com / benext77@hotmail.com
Sponsored by:
China Ucolin Glass Lamination Solution Experts:
-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy Glass
Laminating
-Silicone Rubber Sheet Manufacturer for Solar EVA Photovoltaic Panel
Encapsulation
(uc@ucolin.com / www.ucolin.com /umewe360@gmail.com/umewe360@hotmail.com)
1
Technical Parameters of Ethylene-vinyl acetate EVA Interlayer Film for
Laminated Glass
SUPER-TRANSPARENT EVA FILM TECHNICAL PARAMETERS
Test Item Test Method ST EVA FILM
Tensile Strength(After cross-link) LAB METHOD 20 MPA
Adhesion of Glass LAB METHOD 103N/20mm(180°pealing 剥离)
Adhesion oforganic polymer film LAB METHOD 120N/20mm(180°pealing 剥离 )
High Transmittance LAB METHOD ≥91.0%
HAZE LAB METHOD 0.29%
UV Blocked Rate LAB METHOD 99%
Elongation(After cross-link) ASTMD638 560%
Water Absorption LAB METHOD ≤0.01%
Cross-link rate (135 degrees C,20mins) LAB METHOD 82%
Heat-resistanceIn the 100℃ water for 2 hrs GB-15763.3-2009 No bubbles,
no de-lamination
Humidity-Resistance(60℃,95% RH:400hrs ) LAB METHOD No bubbles or Haze appeared
ANTI-Aging(50℃,65%RH,Radiation 3000
Hrs)
LAB METHOD Light change≤3.0%, No yellow change
Heat&cold shock (Cold-40℃30min, Heat80℃
30mins:50 circles)
LAB METHOD No delamination and bubbles
Impact Resistance Against Shot-Bag GB-15763.3-2009 Qualified
Ball Impact Peeling Resistance GB-15763.3-2009 Qualified
Useful Life LAB METHOD ≥15 Years
The Parameters of EVA Film for Laminated Glass you should care about.
And I also would explain how to test these
parameters.
1. Radiation Resistance —— the most important parameter. It does
decide how many years the Laminated Glass with EVA
Film can be used for outdoor.
How to test:
Make the laminated glass with EVA FILM subjecting to 2000 hours
(different form different standard) of radiation. The
samples of laminated glass with EVA Film are placed at a distance of
1,100mm from 16 ULTRAVITALUX lamps which was
form a 1m*1m field. The temperature is maintained at 45℃ (5℃ tolerance
)and the humidity is 50%.
To measure the durability, the luminous transmission has been measured
by the wavelength between 380nm and 780nm before
All rights reserved by:
China (Ethylene-vinyl acetate)EVA Interlayer Film Manufacturer for
Safety Laminated Glass, Smart Glass, Privacy Glass, LED
Glass, PV Solar Encapsulationetc.
cnc@cncnext.com / www.cncnext.com
eva@evafilms.com / www.evafilms.com
benext77@gmail.com / benext77@hotmail.com
Sponsored by:
China Ucolin Glass Lamination Solution Experts:
-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy Glass
Laminating
-Silicone Rubber Sheet Manufacturer for Solar EVA Photovoltaic Panel
Encapsulation
(uc@ucolin.com / www.ucolin.com /umewe360@gmail.com/umewe360@hotmail.com)
2
2,000 hours of exposure to the ULTRAVITALUX lamps.
In the end, compare the differences of Light Transmittance and check
the presence of any faults(bubbles, opaqueness,
degumming etc)
2. Humidity Resistance—-Placing the laminated glass with EVA FILM
samples vertically inside the climatic chamber and
maintaining them for two weeks at a temperature of 50 degrees and 95%
relative humidity. Water condensation on the surface
of the laminated glass samples is allowed.
No bubbles or opaqueness are noted in the spacer in any of the
laminated glass samples tested. (Bubbles only appear along the
edges, but at less than 15mm from it.)
3. Impact Resistance—-For example： 45kg shot-bag drop from 1200mm
height. It remains unbroken or broken, but no shear
or opening is allowed within the test piece, through which a 75mm
diameter sphere can pass freely.
4. Ultraviolet Radiation Blocking Rate—-Tested by the Light Spectrum Meter.
5. Tensile Strength—-Tested by the Universal testing machine
6. Elongation—-Tested by the Universal testing machine
7. Adhesive Strength—-Tested by the Universal testing machine
8. High Temperature Resistance—-Boiled by hot water
9. Visible Light Transmission Rate—-Tested by the Light Spectrum Meter
Packaging of EVA Interlayer Film for Laminated Glass
How the EVA interlayer film manufacturers package the EVA interlayer
film? Especially the importers of EVA interlayer film
would care about this much.
1.The EVA interlayer film manufacturers firstly seal the EVA
interlayer film by PVC, then package it by the paper skin. And for
the EVA interlayer film exported to foreign country and shipped by
sea, it will also packaged by the wooden box to protect the
EVA interlayer film.
2.If you have specific requirements of the packaging, you can tell the
EVA interlayer film manufacturers, normally they will do
as you said. But there maybe some added cost of the customized packaging.
3.Some EVA interlayer film manufacturers have tried to use the vacuum
sealed packaging to avoid the moisture of the EVA
All rights reserved by:
China (Ethylene-vinyl acetate)EVA Interlayer Film Manufacturer for
Safety Laminated Glass, Smart Glass, Privacy Glass, LED
Glass, PV Solar Encapsulationetc.
cnc@cncnext.com / www.cncnext.com
eva@evafilms.com / www.evafilms.com
benext77@gmail.com / benext77@hotmail.com
Sponsored by:
China Ucolin Glass Lamination Solution Experts:
-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy Glass
Laminating
-Silicone Rubber Sheet Manufacturer for Solar EVA Photovoltaic Panel
Encapsulation
(uc@ucolin.com / www.ucolin.com /umewe360@gmail.com/umewe360@hotmail.com)
3
interlayer film.
Storage Notes of EVA Film for Laminated Glass
If you have imported some EVA interlayer film before, you would know
that every EVA Interlayer film manufacturers will give
some attentions of storage of EVA interlayer film.
1.Heavy burden shall not be laid on the EVA interlayer film and the
EVA interlayer films shall not be piled up more than
three-layer.
2.The EVA interlayer films should be used up in time after the
packaging is opened; if not, please re-pack. And the storage
period should not exceed 12 months( Different EVA interlayer film
manufacturers has different shelf life of EVA interlayer
film.).
3. Please fully confirm the corrosive and permeability of the edge
sealing reagent or glass glue before laminating EVA
interlayer film , for those may lead to EVA interlayer films breaking
away from glasses!
4. Avoid sunlights and thermal radiations. And the temperature of
storage environment should be under 45 degree.
5.Don’t store or transport EVA interlayer film with combustible or
explosive materials.
All rights reserved by:
China (Ethylene-vinyl acetate)EVA Interlayer Film Manufacturer for
Safety Laminated Glass, Smart Glass, Privacy Glass, LED
Glass, PV Solar Encapsulationetc.
cnc@cncnext.com / www.cncnext.com
eva@evafilms.com / www.evafilms.com
benext77@gmail.com / benext77@hotmail.com
Sponsored by:
China Ucolin Glass Lamination Solution Experts:
-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy Glass
Laminating
-Silicone Rubber Sheet Manufacturer for Solar EVA Photovoltaic Panel
Encapsulation
(uc@ucolin.com / www.ucolin.com /umewe360@gmail.com/umewe360@hotmail.com)

Howto Test Properties Characteristics of Glass
Lamination Ethylene-vinyl acetate EVA Interlayer
Film
Created by
China Ethylene-vinyl acetate EVA Interlayer Film Manufacturer
for Safety Architectural Laminated Glass.[cnc@cncnext.com /
www.cncnext.com / benext77@gmail.com / benext77@hotmail.
com) (eva@evafilms.com / www.evafilms.com ]
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
IMPORTANT PROPERTIES OF EVA FILM
– High tensile strength
– Excellent transparency
– Outstanding adhesion strength
– UV protection
– High impact resistance
– Good temperature withstanding
– Water proof
– Humidity durable
– Long-term reliable (long-term aging
resistance)
– Sound barrier
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
Technical Datasheet of EVA Film
Examp
le:
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
Testing tensile strength, pealing strength of EVA Film
Universal Testing Machine
We can use this equipment to test the
tensile strength of EVA Film, and also the
peeling strength between the EVA Film
and Glass surface, or between the
polymer sheet surface and EVA Film.
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
Testing impact resistance of EVA Film
【Impact testing Equipment 】
To test the impact resistance of the
laminated glass made of the EVA
Film samples to be tested.
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
Testing Aging-resistance
UV Radiation Accelerating Aging Tester
Accelerated Aging Tester adopts fluorescent
UV light UVA-340 and the water-spray
system in order to imitate the damage of
sunlight, rain, humidity etc.
The samples is under UV radiation damage
and the water spray damage circularly.The
damage intensity would be more than 1o
times of the damage in the natural
environment.
The damage is like: fading, changing color,
delamination, haze, bubbles, embrittlement ,
aging, oxidation etc.
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
Testing heat-resistance, humidity-resistance and
weather-resistance of EVA Film
Constant Temperature and Humidity Test
You can test EVA Film under great humidity
environment or high temperature.
And you can also test EVA Film under cold and
hot circling environment, like -40degree C for 30
minutes and 85 degree C for 30 minutes as a
circle
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
Testing Haze of EVA Film
【Haze 㼀ester】
You can test the haze of the
laminated glass made of
EVA Film, and also the
transmittance of laminated
glass of testing EVA Film
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
TESTING gel content determination of cross-linked EVA Film
【㼀est system of gel content determination of
cross-link reacted EVA Film】
To see how many percent of gel content of
the EVA Film after laminating heating
processed(after cross link reacted)
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
Easy way toTesting Transmission Values of UV
(ultraviolet radiation), Visible Light and Infrared Ray
【Laminated Glass 㻿pectrometer】
is able to simultaneously measure the Transmission
Values of UV(ultraviolet radiation), Visible Light and
Infrared Ray . The Spectrometer is self-contained light
sources and automatic calibration. No man-driven
adjustment is needed. The users only need to plug the
power supply, turn on the switch and put the Laminated
Glass in the opening. Then the measure data would
appear on the display automatically.
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
Testing UV radiation blacked rate of EVA Film
Spectrophotometer:
Test the UV radiation blacked
rate of laminated glass made of
testing EVA Film samples. You
can test the blacked rate at
different wave-length.
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
Copy Rights
All right reserved by
China Ethylene-vinyl acetate EVA Interlayer Film Manufacturer for
Safety Architectural
Laminated Glass.
China EVA Film for Smart Glass, Privacy Glass, LED Glass etc.
China Solar EVA Film for Solar Panel Encapsulation.
China Switchable Film for Privacy Glass, Smart Glass.
[cnc@cncnext.com / www.cncnext.com / benext77@gmail.com / benext77@hotmail.com)
(eva@evafilms.com / www.evafilms.com ]
Sponsored by
China Ucolin Glass Lamination Solution Experts:
-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy Glass
Laminating.
-Silicone Rubber Sheet Manufacturer for Solar EVA Photovoltaic Panel
Encapsulation.
(uc@ucolin.com / www.ucolin.com /umewe360@gmail.com/umewe360@hotmail.com)
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com
Thanks For Reading
Want to learn more, please go to www.
evafilms.com/www.cncnext.com
Contact Us:cnc@cncnext.com / www.cncnext.
com/benext77@gmail.com

benext77@hotmail.comAll rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
eva@evafilms.com
【Product 2】CNC-SmartSMART FILM FOR PRIVACY SWITCHABLE GLASS
smartfilm@smartestglass.com
【Product 3】CNC-Shield PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
pvb@pvbfilm.net
Web: www.CNCnext.com www.HelloGlass.com www.CNCglass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com

TOOLS FOR INSTALLING SMART GLASS FILM IN ADHESIVE WAY
BY PETER SHIN LIN WWW.CNCNEXT.COM WWW.HELLOGLASS.COM
Scraper:to clean glass before installing smart
glass film
Glove: to protect hands
All rights reserved by CNC INTERLAYER TECH www.cncnext.com
Ethanol(70- 90%): to clean glass, smart film and
over flow SUNLIGHT glue
Lint Free Clean Tissue: to clean windows and
smart glass film
Lint Free Cloth: to clean windows and smart
glass film
All rights reserved by CNC INTERLAYER TECH www.cncnext.com
Transparent Tape: to seal smart film onto
windows
Fabric Tape: to pick up dust if necessary
Special SUNLIGHT Glue: to adhere smart glass
film
All rights reserved by CNC INTERLAYER TECH www.cncnext.com
Dropper: to drop SUNLIGHT glue
Soft Roller:to roll the smart glass film onto
windows
UV Light: to solidify the SUNLIGHT glue faster
All rights reserved by CNC INTERLAYER TECH www.cncnext.com
Iusulating Tape: to cover wire and busbar
Power Device&Remote: to adjust the voltage for
smart glass film, and control smart glass film
All rights reserved by CNC-INTERLAYER TECH:
【1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【2】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Web: www.CNCnext.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com
All rights reserved by CNC INTERLAYER TECH www.cncnext.com

All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
eva@evafilms.com
【Product 2】CNC-SmartSMART FILM FOR PRIVACY SWITCHABLE GLASS
smartfilm@smartestglass.com
【Product 3】CNC-Shield PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
pvb@pvbfilm.net
Web: www.CNCnext.com www.HelloGlass.com www.CNCglass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com
Attentions for Using Conductive Glue for Smart
Glass Film Busbar
WWW.CNCNEXT.COM
1-Don’t let conductive glue touch your
skin,cloth,or eye.
2-Don’t let conductive close to fire or
combustibles.
3-Wear glove when use the conductive glue.
Wash your hands completely after you use the
conductive glue.
4-Use conductive glue in ventilation room.
All rights reserved by CNC-INTERLAYER TECH:
【1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【2】CNC- Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Web: www.CNCnext.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com
All rights reserved by CNC INTERLAYER TECH www.cncnext.com

All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force? EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
eva@evafilms.com
【Product 2】CNC-Smart? SMART FILM FOR PRIVACY SWITCHABLE GLASS
smartfilm@smartestglass.com
【Product 3】CNC-Shield? PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
pvb@pvbfilm.net
Web: www.CNCnext.com www.HelloGlass.com www.CNCglass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com

Glove: to protect hands
Curve Knife:to cut PET out of Smart Film
Lint Free Clean Tissue: to clean the notch after PET is cut out
Ethanol(≥95%): to clean the notch after PET is cut out
Conductive Glue: to be putted on ITO
Brush: to brush the conductive glue on to ITO
Dryer: to dry conductive glue
Conductive Copper Tape: to cover on conductive glue
“Electric Soldering Iron: to melt soldering tin
Attention One:
Before using Electric Soldering Iron, please check if the voltage is suitable.
Attention Two:
If it’s first time the Electric Soldering Iron is used, some smoke
appearing is normal, and the smoke will disappear soon. But please
make sure the working room is good at air ventilation.
Attention Three:
The heating device is made of ceramics, so it’s not very good at
impact resistance, please use with care.
Attention Four:
Please don’t change the devices of the Electric Soldering Iron unless
you are professional. And don’t change devices when the power is on.”
Soldering Tin: to solid elctric wire to copper tape
Electric Wire: to be Soldered with copper tpae
Insulating Tape: to cover the wire and copper tape
“All rights reserved by CNC-INTERLAYER TECH:
【1】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【2】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Web: www.CNCnext.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com“

All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force? EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
eva@evafilms.com
【Product 2】CNC-Smart? SMART FILM FOR PRIVACY SWITCHABLE GLASS
smartfilm@smartestglass.com
【Product 3】CNC-Shield? PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
pvb@pvbfilm.net
Web: www.CNCnext.com www.HelloGlass.com www.CNCglass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com

ALL TOOlS YOU NEED FOR INSTALLING SELF-ADHESIVE PRIVACY SMART GLASS
FILM FOR INSTALLED WINDOWS
BY PETER SHIN LIN WWW.CNCNEXT.COM WWW.HELLOGLASS.COM
Scraper:To Clean the Glass
Glove: To protect hands
Lint Free Clean Tissue: To clean windows and smart film
Lint Free Cloth: To clean windows and smart film
Transparent Tape: To seal smart film onto windows
Fabric Tape: To pick up dust if necessary
Iusulating Tape: To cover wire and busbar
Special SUNLIGHT Glue: To adhere smart film
Dropper: To drop SUNLIGHT glue. Choose the size you need
Soft Roller:To roll the smart film onto windows. Two size for you to
choose
UV Light: To solidify the SUNLIGHT glue faster
Ethanol(70-90%): to clean glass, smart film and over flow SUNLIGHT glue
“All rights reserved by CNC-INTERLAYER TECH:
【1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【2】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Mail: cnc@cncnext.com
Web: www.CNCnext.com
benext77@gmail.com/
benext77@hotmail.com“